GE CT9570 Owner's Manual page 17

Oven Doors (Cont.)
Lower Oven Door Removal (Recommended)
NOTE:
To remove the door:
1. Open the oven door as far as it will go.
2. Remove hinge bracket from front frame and set
aside. The hinge bracket must be replaced for proper
door functionality when door is reinstalled.
3. Push both hinge locks down toward the door frame to
the unlocked position. This may require a flat-blade
screwdriver. DO NOT LIFT THE DOOR BY THE
HANDLE!
4. Place hands on both sides of the door and close the
oven door to the removal position (approximately
1"–2" [2.5 cm–5.1 cm] from the closed position).
slots. NOTE:
you have a firm grip before lifting the oven door off
dents or scratches.
Replacing the Lower Oven Door
NOTE:
not lift the door by the handle.
2. With the door at the same angle as the removal
position (approximately 1"–2" [2.5 cm–5.1 cm] from
the closed position), seat the notch of the hinge arm
into the bottom edge of the hinge slot. The notch of
the hinge arm must be fully seated into the bottom of
the slot.
indentation is not seated correctly in the bottom edge
of the slot.
4. Push the hinge locks up against the front frame of the
oven cavity, to the locked position.
5. Replace hinge bracket. The hinge bracket must be
replaced for proper door functionality.
6. Close the oven door.
49-80788
Hinge Slot
Hinge Arm
Hinge Clears Slot
Hinge
Arm
Edge of
Slot
Hinge in
Position
Securely Fitted
Hinge Slot
17