Before You Start - Silk'n Flash&Go Instructions For Use Manual

Before using Silk'n Flash&Go™ for the first time, please read this User Manual in its entirety.
Pay particular attention to sections on device use procedures, device operation, and after-use procedures.
We recommend you re-familiarize yourself with this User Manual before each use of Silk'n Flash&Go™.
Silk'n Flash&Go™ is a powerful electrical device. As such, it should be used with special attention to safety.
Please read all warnings and safety precautions before use, and strictly follow them when using Silk'n
Flash&Go™.

1. Before You Start

Silk'n Flash&Go™ is a light-based
device for permanent hair reduction
designed for home-use.
1.1. Silk'n Flash&Go™ device
description
Your Silk'n Flash&Go™ consists of a HAIR
REMOVAL UNIT with a CONTROL PANEL
and a DISPOSABLE LAMP CARTRIDGE.
On the Silk'n Flash&Go™ HAIR REMOVAL
UNIT HANDLE you can find the PULSE
BUTTON. The DISPOSABLE LAMP
CARTRIDGE is located at the tip of the HAIR
REMOVAL UNIT.
Hair Removal unit
1
2 Control panel
3 Pulse button
4 Disposable Lamp Cartridge
1.2. Package contents
Upon opening the Silk'n Flash&Go™ package, you will find the following parts:
Silk'n Flash&Go™ Hair Removal Unit
A wall mount adaptor.
2
Skin Color Sensor
5 9
6 Treatment Surface 10
7 Control Panel
11
8 On/Stby switch
12
2
1
6
4
5
3
Stand By Indicator Light
Power On Indicator Light
Energy Level Setting Buttons
Energy Level Indicator Lights
15 15
16
7
12
14
13
11
9
10
8
Replace Cartridge Indicator Light
13
System Warning Indicator Light
14
Skin Tone Warning Indicator Light
15
Ready Indicator Light
16
16