Table of Contents
Advertisement
THE INFORMATION MODE
The console features an information mode that keeps
track of the total distance that the walking belt has
moved and the total number of hours that the treadmill
has been used. The information mode also allows you
to switch the console from miles to kilometers. In addi-
tion, the information mode allows you to turn on and
turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
An "E" for English miles or
an "M" for metric kilometers
will appear in the
Calories/Pulse display.
Press the speed increase
button to change the unit of
measurement if desired.
The Distance/Incline display
will show the total number of
miles (or kilometers) that the
walking belt has moved.
The Time display will show
the total number of hours the
treadmill has been used.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the circuit breaker to the reset position, and in-
sert the key into the console. However, when you re-
move the key, the displays will remain lit, although the
buttons will not function. If the demo mode is turned on,
a "d" will appear in the Speed display while the informa-
tion mode is selected. To turn on or turn off the demo
mode, press the speed decrease button.
To exit the information mode, remove the key from the
console.
17
Advertisement
Table of Contents
