Lubrication - RIDGID 916 Operator's Manual

Maintenance Instructions
Make sure machine is unplugged from
WARNING
power source before performing maintenance or making
any adjustments.

Lubrication

Drive Shaft and Groove Roll Shaft Bearings.
Lubricate with multi-purpose grease through fittings locat-
ed on groove roll shaft and lower roll housing after every
roll change.
Machine Storage
WARNING
Motor-driven equipment must be kept
indoors or well covered in rainy weather. Store groover
in a locked area that is out of reach of children and
people unfamiliar with roll groover equipment. This
machine can cause serious injury in the hands of
untrained users.
Find Quality Products Online at:
916 Roll Groover
GlobalTestSupply
www.
Service and Repair
Service and repair work on this Roll Groover must be
performed only by qualified repair personnel. Machine
should be taken to a RIDGID Independent Authorized
Service Center or returned to the factory. All repairs
made by Ridge service facilities are warranted against
defects in material and workmanship.
WARNING
tical replacement parts should be used. Failure to follow
these instructions may create a risk of serious injury.
Ridge Tool Company
When servicing this machine, only iden-
.com
sales@GlobalTestSupply.com
13