Display Option; Call Option - Panasonic KX-TCD400TW Operating Instructions Manual

400TW(02).fm Page 19 Wednesday, February 19, 2003 7:03 PM

: Display Option

Before programming, please follow steps 1 to 3.
1 2
Press MENU. Search/Select
"SETTING HS".
Selecting the Talk Mode Display
When a phone number cannot be displayed even if you set "PHONE NO", the length of
the call will be displayed.
Search/Select
4
"TALK MODE".
Selecting the Display Language
Search/Select
4
"LANGUAGE".
• To exit the operation, press
*1 If you set a language you cannot read, reset the handset to its initial settings.
Press MENU DOWN
All handset setting will be reset to their initial settings (p.25). However, the Phonebook
data will be saved.

: Call Option

1 2
Press MENU. Search/Select
"SETTING HS".
Call Prohibition On/Off
This allows you to make emergency call.
Search/Select
4
"CALL BAR".
• To exit the operation, press
*1 The factory preset is 0000.
*1 If "ON" is selected,
3
Search/Select
"DISPLAY OPT".
Search/Select
5
"TALK TIME"(Length of the call) or
"PHONE NO"(Phone number).
Search/Select
5
desired language.*1
any time.
RIGHT UP RIGHT
3
Search/Select
"CALL OPT".
4-digit
5
Handset PIN
*1
any time.
is displayed.
Handset Settings
4-digit Handset PIN
Search/Select
6
"ON" or "OFF".*2
UP OK
19