Table of Contents
Advertisement
S11 Zero Delay 0 to 99 updates. The weight display must be within the zero band for the
S12 Zero
Tracking
S13 Tracking
Delay
S14 lb/kg
S15 Scale ID
S16 Brightness
S17 Sleep Mode
S18 Angle Limit
END
( ) indicates factory set defaults unless otherwise specified.
2.2 Scale Menu Definitions Continued:
selected number of updates to be considered zero. 4 (Default)
0
0.5 divisions.
(1)
1 division. (Default)
2
3 division
Press the right arrow key to enter. Use the up and down arrow keys to make
the desired selection (0, 1, or 2), then press the
and exit. S12 will be displayed.
0 to 99 updates. The amount of time that the display within the allowed
graduations before it will automatically be zeroed. 10 (Default)
(lb/kg): allows the indicator to be switched between pounds and kilograms
By pressing the
LB: This sets the display to pounds only.
Kg: This sets the display to Kilograms only.
1 to 99 Scale ID used in RF link output. 1 (Default)
0 to 15. Adjusts the LED display intensity where 15 is the brightest. 15
(Default)
0 to 30 minutes. The display will turn off after the set time elapses with no
scale activity. 0 (Default).
1 to 9 Degrees. 6 (Default).
Exits back to the main menu
lb/kg
key
9
PRINT/ENTER
key to save
Advertisement
Table of Contents
