ProForm 595 Pi User Manual page 9

8. Lower the Uprights (31, 36) until the Handrails (11, 18)
are touching the floor.
See the lower drawing. Position the Uprights (31, 36) so
the treadmill Frame (74) is centered between them.
Firmly tighten the four Upright Bolts (40) and the two
Frame Bolts (32). Be careful not to overtighten the
Frame Bolts.
9. Attach the end of the ground wire on the Wire Harness
(28) to the indicated small hole in the Upright Base (48)
with a Silver Ground Screw (27).
Make sure that the grommet is pressed into the side of the
Right Upright (36).
Raise the Uprights (36, 31) to the vertical position.
8
36
9
Grommet
48
Ground
Wire
9
32
31, 36
40
11, 18
Top View
74
36
28
27
31