ProForm 595 Pi User Manual page 18

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of miles or kilometers that the
walking belt has moved and the total number of hours
that the treadmill has been operated. The information
mode also allows you to select miles or kilometers as
the unit of measurement and to turn on and turn off the
demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be dis-
played:
The Distance/Calories display
will show the total number of
miles or kilometers that the
walking belt has moved.
The Time/Pace display will
show the total number of
hours that the treadmill has
been used.
An "E" for English miles or an
"M" for metric kilometers will
appear in the Speed display.
Press the Speed increase but-
ton to change the unit of mea-
surement, if desired.
IMPORTANT: If a "d" appears
in the Incline/Pulse display, the
console is in the "demo" mode.
This mode is intended to be
used only when a treadmill is
displayed in a store. When the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the indicators in the display will automatically light
in a preset sequence, although the buttons on the con-
sole will not operate. If a "d" appears when the infor-
mation mode is selected, press the Speed decrease
button so the "d" disappears.
To exit the information mode, remove the key from the
console.
18