Controller Operation - Brilix XHPFD 80 E User Manual

6. Controller Operation

6.1 button
Press to start the heat pump unit, the LED display shows the desired water temperature
for 5 seconds, then shows the inlet water temperature and the operation mode.
Press to stop the heat pump unit and show "OFF"
During the parameter checking and setting, press the
setting.
Press again to turn on/off the machine.
6.2 button
It will be under function only with other button.
6.3 and button
Clock/unclock the display:
Hold and for 5 seconds to lock/Unlock the display.
Water temperature setting:
or to set the water temperature directly.
Press
6.4
Symbol of heating, the light will be on when it is in operation.
When defrosting, the light will flash.
6.5
Symbol of cooling, the light will be on when it is in operation.
6.6
Symbol of automatic stop when it is light.
6.7
Symbol of automatic start when it is light.
6.8 Parameter checking
Press first, then press to check the " User parameter from d0 to d11.
12
to quick-exit and save the current