Fisher Scientific XL15 User Manual page 20

The pH Setup screen present many options to control the operating parameters of the
meter. The meter is factory set with regard to these options, and is ready for use under
most circumstances (see appendix page 59 for default settings). The operating parame-
ters of the pH mode can be set and controlled from the pH setup screen. The pH Setup
section will guide you through the various options available in the pH setup mode.
pH Setup
Sample ID MANUAL
Buffer Group
USA
Buffer Recognition
Auto Read Mode
pH Stability Criteria
Default Temperature
Isopotential Point
Alarm Limits
Print Criteria
Data Storage Criteria
Display Criteria
Cancel
OK
Function Buttons on pH Setup Screen
Touch OK to confirm pH Setup and return to the pH Measure screen.
Touch Cancel to exit and return to the pH Measure screen without confirming pH Setup.
Touch View to view all pH data points stored in memory. See pages 32-33 for details.
When you touch the Help button, information about the current screen appears. This
information includes step-by-step instructions for operating the meter from the current
screen and possible applications information for that screen.
Touch Reset to reset all pH Setup Criteria to the factory default.
SEQUENCE
EURO NIST
2.00 4.00 7.00 10.00 12.00
AUTO MANUAL
AUTO MANUAL
FAST MEDIUM SLOW
25.0
C F K
0.00
mV
ON -2.00 pH
Low
OFF High 20.00 pH
Touch here to edit
Touch here to edit
Touch here to edit
View Help
pH SETUP SCREEN
OK X
NONE
CUSTOM
Reset
pH Setup
19