Panasonic WJ-NX200K Installation Manual page 23

4 Connections
Alarm connection example
When a signal output from the other device is supplied to the Alarm input 1 to 9 terminals (pin nos. A1~A9), recording or an
alarm action will be performed in accordance with the settings. When an alarm device such as a buzzer, a lamp, etc., is installed
outside, connect them to the Alarm output terminal (pin no. A10).
Alarming device
Sensor
(continued)
Relays, etc.*
* Attached when necessary
(Signal ground)
B10
Door security
switch
A11 A10 A2 A1
23