Panasonic WJ-NX200K Installation Manual page 19

4 Connections
When PC and the camera are in different networks
When the PC and the camera are configured on different networks, connect the PC to the PC port via a switching hub.
Recorder
[PC port]
IP address: 192.168.1.250
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Ethernet cable (locally procured):
category 5e or better (straight)
Network camera (x 16 max.)
(When 1 license is used for the additional camera kit)
Note:
• Cameras shall be connected to the camera/PC port. If the camera is connected to the PC port, the camera will not be
detected automatically.
(continued)
[Camera/PC port]
IP address: 192.168.0.250
Subnet mask: 255.255.255.0
Ethernet cable (locally procured):
category 5e or better (straight)
PoE hub
Network
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Switching hub
PC
IP address: 192.168.1.x
(except 0, 1, 250 and 255)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
19