Power And Charging - Netscout LinkRunner G2 User Manual

Power and Charging

The LinkRunner G2 contains a rechargeable
Lithium Ion battery. You can charge your LR G2
using either AC or Power over Ethernet (PoE). The
LinkRunner G2 does not charge via the USB port.
See Buttons and
Charging
To charge with AC power, plug the included AC
adapter into an AC outlet, and connect it to the
charging port on the device.
To charge with PoE, connect the RJ-45 port on the
device to a network switch with PoE available or
with a PoE injector.
NOTE: The LR G2 must be powered on or in sleep
mode to charge via PoE.
Charge the battery for 4-6 hours before first use.
Powering On
Press the power button on the front of the
l
unit to power on the LinkRunner G2.
When the unit is on, press the power button
l
to put it in sleep mode.
Ports.
18
Physical Features