Assembly - ProForm 30755.0 User Manual

Proform user manual treadmill 30755.0
Table of Contents

Advertisement

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included hex keys
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses
shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat-
tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic
parts, do not use power tools for assembly.
Extension Leg Nut (67)–2
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side as shown. Partially
fold the Frame (58) so the treadmill is more sta-
ble. Do not fully fold the treadmill until it is
completely assembled.
Insert an Extension Leg (89) into the base of the
Uprights (84). Hold an Extension Leg Nut (67) in
the bottom of the Extension Leg, and thread a
2.5" Extension Leg Bolt (65) into the top of the
Extension Leg. Next, thread a 2.25" Extension
Leg Bolt (92) into the bottom of the Extension
Leg. Firmly tighten the Extension Leg Bolts.
Slide a Front Endcap (44) onto the base of the
Uprights (84). Partially tighten a Front Endcap
Screw (14) into the Front Endcap and the base.
and your own Phillips screwdriver
1" Tek Screw (83)–2
Front Endcap
Screw (14)–2
3/4" Screw (2)–2
1
6
Handail Bolt (64)–4
2.25" Extension Leg Bolt (92)–2
2.5" Extension Leg Bolt (65)–2
84
65
89
67
58
.
14
44
92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp580

Table of Contents