Advertisement
fixed by the two brackets, that will be fixed to
the rear oven's back (Fig.
1).
2.2 - Electrical connection
The electrical
must be carried out by qualified personnel in
compliance with the
European regulations
The Ove is replaced, it must be compatible with
the maximum power of the
It is recommended to have the installation
done by a qualified electrician
in compliance with the regulations in force
Attention!!! – A bipolar safety switch must be
set upstream of the hood.
Attention!!! – The equipment must be earthed
properly according to the
safety regulations of the electrical system
connection, single phase 220 – 230 V ~ 50/60
Hz,in force.
en hood is supplied with electric cable and plug.
If the plug hood.
electrician,
force.
system.
fig.1
2.4 – Operation
The Oven Hood will be turned on by the front
switch (Fig.
Fig.2
3. Maintenance
Attention!!! – Before carrying out any
maintenance operations, turn off
the current by using the appropriate switch or
disconnecting the plug.
Attention!!! – Any maintenance operation
must be carried out by
qualified personnel only.
Maintenance operations may include the
removal of the rear
Advertisement
