Related Manuals for MYiR MYS-6ULX-IOT
Summary of Contents for MYiR MYS-6ULX-IOT
- Page 1 MYS-6ULX-IOT | Product Manual MYS-6ULX-IOT Product Manual Version V1.0 22-Jan-2017 www.myirtech.com...
- Page 2 MYS-6ULX-IOT | Product Manual Version History Version Description Date V1.0 Initial version 22-Jan-2017 www.myirtech.com...
- Page 3 MYS-6ULX-IOT | Product Manual Table of Contents Table of Contents ......................3 1.Product Abstract ......................4 2. Hardware Characteristics ..................... 6 2.1 CPU Characteristics ......................6 2.2 Board Resource ....................... 7 2.3 Extend Header Resource ....................8 3. Interfaces ........................9 4.
-
Page 4: Product Abstract
MYS-6ULX-IOT are integrated with rich peripherals including Ethernet, USB OTG, USB Host, TF Card, WIFI, User keys, LED, LCD interface, IO expansion interface and other functions.MYIR is using the 14 x 14mm, 0.8 mm ball pitch, 289MAPBGA package on MYS-6ULX-IOT. i.MX 6ULL application processor on the MYS-6ULX-IOT board provides multiple compatible options of Y0, Y1 and Y2 sub families. - Page 5 MYS-6ULX-IOT | Product Manual Speed 528 MHz 528 MHz 528 MHz 32 KB-I, 32 KB-D 32 KB-I, 32 KB-D Cache 32 KB-I, 32 KB-D 128 KB L2 128 KB L2 128 KB 128 KB 128 KB OCRAM 16-bit LP-DDR2, 16-bit LP-DDR2,...
-
Page 6: Hardware Characteristics
MYS-6ULX-IOT | Product Manual 2. Hardware Characteristics 2.1 CPU Characteristics 2.1.1 CPU Overview The i.MX 6ULL is a high performance, ultra efficient processor family with NXP’s advanced implementation of the single ARM Cortex®-A7 core. It operates at speeds of up to 528 MHz. -
Page 7: Board Resource
9x9 272 MAPBGA 0.5 mm pitch 2.2 Board Resource MYS-6ULX-IOT single board computer is integrated with rich peripherals including Ethernet, USB OTG, USB Host, TF Card, WIFI, User keys, LED, LCD interface, IO expansion interface and other functions. The board is equipped with 256M byte DDR3L memory, 256MB NAND Flash by default. -
Page 8: Extend Header Resource
2.3 Extend Header Resource MYS-6ULX-IOT single board computer is integrated with rich peripherals.Extended signal pins are available to expand the peripherals. MYS-6ULX-IOT provides two 2.0mm pitch 2x20-pin headers to allow users expand other functions. Please refer to the below for extend header resource. -
Page 9: Interfaces
,customer will need to refer the PIN definition for signal configuration. 3. Interfaces Rich peripheral interface resources are provided on the MYS-6ULX-IOT single board computer.Detailed resources and the location on the board provided as below. Figure 3-1 MYS-6ULX-IOT Resources Please refer to the interface list as below. - Page 10 Buttons User Button 5V Power LED LEDs User LED1 User LED2 Expansions for SPI,I2C,UART,Camera and ETH Extend Header signal TF Card Micro SD Card Socket WIFI USB WIFI Module Switch Boot Configure Switch Table 3-1 List of MYS-6ULX-IOT Resources www.myirtech.com...
-
Page 11: Hardware Design
MYS-6ULX-IOT | Product Manual 4. Hardware Design 4.1 Power supply i.MX 6ULL includes integrated power management module that reduces the complexity of external power supply and simplifies the power sequencing.It is easy to implement the power supply unit via discrete device. -
Page 12: Clock Resources
32.768 Khz CPU RTC clock(Y2) 24 Mhz USB HUB Clock(Y5) Figure 4-2 Clock Resources 4.3 DDR3L SDRAM MYS-6ULX-IOT single board computer is equipped with a 256MB (128Mx 16Bit) DDR3L SDRAM Memory. The part number is K4B2G1646F-BYK0 from sumsung.The working www.myirtech.com... -
Page 13: Emmc Memory
Figure 4-3 DDR3L SDRAM 4.4 eMMC Memory MYS-6ULX-IOT is designed to support both NAND Flash and eMMC on PCB design. eMMC is DNP on-board in default,while 256MB NAND Flash is the default memory configuration for the board. Customer can choose to remove the NAND Flash and assemble eMMC for R&D purpose, or get MYIR to customize on volume production. -
Page 14: Nand Flash Memory
Figure 4-4 eMMC Memory 4.5 NAND Flash Memory MYS-6ULX-IOT is designed to support both NAND Flash and eMMC on PCB design. NAND Flash with 256MB is connected to the GPMI controller of the processor in default. part number is MT29F2G08ABAEAWP from Micron.It can be used to store the system booting code and other information. -
Page 15: Ethernet
Figure 4-5 NAND Flash 4.6 Ethernet MYS-6ULX-IOT is equipped with a Ethernet operating at 10/100 Mb/s,which offering a standard RJ45 connection(With voltage transformer inside the socket).The PHY silicon with part number of LAN8720A from Microchip is used. The PHY address of MIDO bus is 0.Please refer to the schematic of the Ethernet of the board as below. -
Page 16: Micro Sd Card
SD1 is connected to a micro SD card connector (4 bit mode) on the MYS-6ULX-IOT. It can be used to store the system booting code and other information using a mciro SD card memory. -
Page 17: Lcd & Touch Panel Interface
WXGA (1366 x 768) at 60 Hz. A 50 pins FPC connector have been used for the display port on the MYS-6ULX-IOT.Linux drivers are provided to work with MIYR LCD panels for 4.3 inch LCD(480*272) and 7 inch LCD(800*480).Resistance and capacitance touch panel are supported.Please refer to below for detail design of LCD interface. - Page 18 MYS-6ULX-IOT | Product Manual WIFI module. Please refer to the schematic of the USB OTG connector of the board as below. Figure 4-9 USB OTG Refer to the schematic of USB Hub as below. Figure 4-10 USB Hub Refer to the schematic of USB Host as below.
-
Page 19: Wifi
USB hub, because of the resource constraints of i.MX6ULL processor. Figure 4-12 WIFI Module 4.11 Button & LEDs MYS-6ULX-IOT is equipped with a user button.Please refer to the schematic of the button as below. www.myirtech.com... -
Page 20: Boot Configure
MYS-6ULX-IOT | Product Manual Figure 4-13 User Button MYS-6ULX-IOT is equipped with two user LEDs.Please refer to the schematic of the LEDs as below. Figure 4-14 User LEDs 4.12 Boot Configure The boot process begins at the Power-On Reset (POR) where the hardware reset logic forces the ARM core to begin the execution starting from the on-chip boot ROM. - Page 21 MYS-6ULX-IOT | Product Manual Figure 4-15 Boot Configure There are some differences between the NAND Flash version and the eMMC version in the boot Configure. Bit1 and Bit2 is used to select boot device. Please refer NAND Flash version setting as...
-
Page 22: Expansion Interface
Table 4-4 Boot Type Configure 4.13 Expansion Interface MYS-6ULX-IOT is equipped with two pin header (40 pins with 2.00mm pitch),where up to 46 free GPIOs have been provided.Those GPIOs also can be used as other functions, such as SPI,QSPI,UART,I2C,and so on. - Page 23 Figure 4-17 Expansion Interface (J3) 4.14 Debug UART MYS-6ULX-IOT is equipped with a debug UART, which can be used as Linux terminal to debug the system. A pin header (1x3pins, 2.54mm pitch) has been used for the debug UART port. The debug UART is 3.3V LVTTL Level standard. Consumers can use it with a USB to UART (TTL level) cable.
-
Page 24: Electronic Characteristics
MYS-6ULX-IOT | Product Manual 5. Electronic Characteristics 5.1 Operating Temperature Parameter Des. Application Scenarios Nor. Unit — — ℃ Commercial Level Table 5-1 Operating Temperate 5.2 Power Supply Characteristics Parameter Item Label Description Normal Unit System Voltage Power In System Current Linux system，... - Page 25 MYS-6ULX-IOT | Product Manual Parameter Item Label Description Normal Unit Input High Voltage Input Low Voltage 0.99 Output high Voltage 3.15 Output Low Voltage 0.15 Table 5-3 GPIO DC Characteristics www.myirtech.com...
-
Page 26: Mechanical Characteristics
MYS-6ULX-IOT | Product Manual 6. Mechanical Characteristics PCB Layers 8 Layers PCB, Immersion Gold Process, Lead-Free Mechanical 70x55x17.5mm Figure 6-1 Mechanical Information of MYS-6ULX-IOT For more details about the board, please refer to the DXF file. www.myirtech.com... - Page 27 Delivery Time MYIR will always keep a certain stock for its regular products. If your order quantity is less than the amount of inventory, the delivery time would be within three days; if your order quantity is greater than the number of inventory, the delivery time would be always four to six weeks.
- Page 28 MYS-6ULX-IOT | Product Manual Technical Support MYIR has a professional technical support team. Customer can contact us by email (support@myirtech.com), we will try to reply you within 48 hours. For mass production and customized products, we will specify person to follow the case and ensure the smooth production.
- Page 29 6) For any maintenance service, customers should communicate with MYIR to confirm the issue first. MYIR’s support team will judge the failure to see if the goods need to be returned for repair service, we will issue you RMA number for return maintenance service after confirmation.
- Page 30 During the warranty period, the shipping cost which delivered to MYIR should be responsible by user; MYIR will pay for the return shipping cost to users when the product is repaired. If the warranty period is expired, all the shipping cost will be responsible by users.
Need help?
Do you have a question about the MYS-6ULX-IOT and is the answer not in the manual?
Questions and answers