Table of Contents
Advertisement
MAINTENANCE
Before all cleaning or dismantling operation, it is imperative to :
. disconnect the hob to the mains supply.
. let all parts of the hob cool down.
Never use :
. harsh abrasives, scouring pads or sharp object to clean the hob.
• GENERAL MAINTENANCE
THE
ENAMELLED
HOB
. Enamelled steel hob : simply clean the enamelled hob with soapy water when the hob is
cold, rinse and wipe with a clean dry cloth. If you clean the enamelled hob when it is hot,
you may tarnish it.
. Stainless steel : clean with soapy water, rinse and dry. You can use a special product to clean
stainless steel which is available in stores.
THE
KNOBS
For thorough cleaning, the control knobs can be removed by pulling them upwards. Clean
exclusively with soapy water and dry well before replacing them.
THE HOT PLATE
Heat it for a while if necessary, to burn the deposits. After switching off and cooling down
of the plate, wipe it with an absorbing paper. In any cases, it is important to protect the hot
plate from humidity.
Do not use abrasive products.
To maintain and preserve the appearance, rub a drop of neutral oil, such as sewing machine
oil into the surface of the hot plate.
The hot plate should always be dry, or slightly greasy, if it is not to be used for some time.
Remove any rust using emery paper followed by a suitable commercially available product.
1 2
Advertisement
Table of Contents
