Trust 632AV Manual

Lcd power video
Hide thumbs Also See for 632AV:

Advertisement

Quick Links

Instructions when using for the first time
1.
Preparing the camera for use
2.
Photograph, video and sound recordings
3.
Playing recordings on the camera
4.
Installing the driver
5.
Installing the applications
6.
Connecting the camera
7.
Playing recordings and transferring them to a PC
8.
Editing recordings on a PC
1
Introduction
This instruction manual is for users of the TRUST 632AV LCD POWER VIDEO. This
camera can take photographs with a maximum resolution of 1600 x 1200 (2M pixels)
and record videos in a quality almost equivalent to VHS quality. The camera has an
8 Mbyte internal memory, a webcam function, digital video recording, an automatic
exposure function and a lens with a macro setting for taking close-up pictures. The
camera's memory can be increased up to a maximum of 512 Mbyte using a CF
memory card. Some models may include a CF card. See the side of the packaging
for more information.
2
Safety
2.1

General information

Carefully read the following instructions before use.
- The TRUST 632AV LCD POWER VIDEO does not require any special
maintenance. Use a slightly damp, soft cloth to clean the camera.
- Do not use aggressive substances, such as white spirit, to clean the device.
These may harm the material.
- Do not submerge the device in liquid. This may be dangerous and will damage
the device. Do not use this device near water.
- Do not repair this device yourself.
- Do not look through the viewfinder if it is aimed directly at the sun, because this
may damage your eyes.
- Do not point the camera directly at the sun for a long period of time, because this
can damage the sensor.
2.2
Batteries
1.
The batteries supplied with the camera are not rechargeable. Do not try to
recharge them, The batteries may explode.
2.
Never throw the batteries onto an open fire. The batteries may explode.
3.
Never drill holes into the batteries.
4.
Keep the batteries out of the reach of small children.
5.
Only use AA alkaline or rechargeable AA NiMH batteries with this camera.
6.
When the batteries are empty, ask your local authority where you can
dispose of them.
Note:
Do not use old and new batteries at the same time, because the old
batteries may leak and cause damage.
Note:
The batteries should be removed if the camera is not going to be used
for some time. This will save the battery capacity.
Note:
Recordings saved in the internal 8 MB memory will be deleted when
the batteries are replaced or become empty. Use a CF card or transfer
TRUST 632AV LCD POWER VIDEO
Chapter
(4.1 to 4.5)
!
(4.6)
(4.7)
(5.2)
(6)
(5.3)
(7.1)
(7.2 to 7.5)
1
U K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 632AV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Trust 632AV

  • Page 1: General Information

    (7.2 to 7.5) Introduction This instruction manual is for users of the TRUST 632AV LCD POWER VIDEO. This camera can take photographs with a maximum resolution of 1600 x 1200 (2M pixels) and record videos in a quality almost equivalent to VHS quality. The camera has an 8 Mbyte internal memory, a webcam function, digital video recording, an automatic exposure function and a lens with a macro setting for taking close-up pictures.
  • Page 2 TRUST 632AV LCD POWER VIDEO the recordings to your computer before replacing the batteries or before they become empty. Description of the camera Front of the camera Use table 1 in combination with figure 1. Item Description Function Exposure button Takes a photograph.
  • Page 3 TRUST 632AV LCD POWER VIDEO Right-hand side Use table 3 in combination with figure 1. Item Description Function Fixing point for the wrist For securing the wrist strap to the camera. strap. Speaker For emitting sound from video and sound recordings.
  • Page 4: Using The Camera

    TRUST 632AV LCD POWER VIDEO Using the camera Attaching the wrist strap and the sticker A wrist strap is supplied with the camera. Attach the wrist strap as follows. Insert the thin end of the wrist strap through the eye (14 in figure 1).
  • Page 5: Inserting The Batteries

    Insert the two AA batteries into the camera as shown above the battery holder. Close the battery flap by sliding it closed. The TRUST 632AV LCD POWER VIDEO is now ready for use. Note: Only use non-rechargeable alkaline batteries or NiMH 1600 mA, or higher, rechargeable batteries.
  • Page 6 4.6.3 Quality You can take photographs in a high and a low quality using the TRUST 632AV LCD POWER VIDEO. The resolution remains the same, but twice as many photographs can be saved in the memory by using a higher compression. However, a higher compression may cause distortion in the image.
  • Page 7 4.6.4 Video standard The TRUST 632AV LCD POWER VIDEO has a video output. The default setting is for use in Europe (PAL). If you wish to connect the camera to a TV in the USA, set the output to NTSC.
  • Page 8: Making Recordings

    TRUST 632AV LCD POWER VIDEO Making recordings 4.7.1 The first photograph Comment: To save the batteries, the camera will turn off automatically when it has not been used for 1 minute. See figure 1. Turn the camera on (see chapter 4.4).
  • Page 9 TRUST 632AV LCD POWER VIDEO Table 8: Maximum number of photos. This number can be doubled by changing the quality to ‘Low’. If the CF card is full, it can be removed and recordings can then be saved in the internal memory.
  • Page 10 TRUST 632AV LCD POWER VIDEO 64 MB 128 MB 256 MB 512 MB Table 9: Total time duration of video clips. The actual duration depends on the subject and can be up to 40% longer. The CF card can be removed when it is full.
  • Page 11 TRUST 632AV LCD POWER VIDEO 4.8.2 Deleting selected recordings Delete files that you no longer require. Open the play menu (chapter 4.8.1, points 1 to 4). Scroll to the file you wish to delete. Play the file if you are not sure whether you have selected the correct file.
  • Page 12: Installing The Software

    Installer. The Trust Software Installer window will appear See figure 11. Select the language you wish to use for the installation. Click on ‘TRUST 632AV LCD POWER VIDEO‘ to start the installation of the camera. Follow the on-screen instructions. The installation of the driver and software for the TRUST 632AV LCD POWER VIDEO has now been completed.
  • Page 13: Connecting The Camera

    4.0. Photo Express 4.0 is an application that can be used to load and edit the photographs on your PC which you have taken using your TRUST 632AV LCD POWER VIDEO. This program requires 500 MB free hard disk space. Follow the...
  • Page 14: Using The Software

    Photo Explorer is useful if you wish to download photographs and save them on your computer. Follow the instructions below to install Photo Explorer 7.0. Start the Trust Software Installer (see chapter 5.2, points 1 – 3). Figure 11 will appear. Select ‘Photo Explorer’.
  • Page 15 Check whether the DV Disk option has been selected on the camera (see figure 7). Click on ‘Start -> Programs -> TRUST 632AV LCD Power Video -> Power Video Manager’. Figure 9 will appear. The camera has now been configured so that you can edit the video clips, photographs and audio recordings which you have previously made.
  • Page 16 Connect the camera to your computer. Select ‘Live’ from the camera’s menu (see figure 8). Click on ‘Start -> Programs -> TRUST 632AV LCD Power Video -> Power Video Manager’. Figure 10 will appear. The image will be displayed on the screen.
  • Page 17 It is recommended to first stop the image using button 7. Close Closes the program. Table 12: Trust DV Power Video Manager used in the live mode. Use this table together with figure 10. 7.1.5 Opening saved photographs or video clips If you wish to connect the camera (this is not necessary), select the ‘DV disk’...
  • Page 18 The main window will appear. The 'Set-up Internet Connection' window may also appear. Click on the 'Skip for now' button to close this window if it appears. The Trust camera will be visible as a ‘Removable disk’ in the list on the left-hand side of the window.
  • Page 19 TRUST 632AV LCD POWER VIDEO Double-click on this. The ‘DCIM’ folder will be visible. Double-click on this. The ‘100media’ folder will be visible. This folder contains your photographs. Double-click on this. Your photographs will slowly become visible. The window will now look like figure 13.
  • Page 20 TRUST 632AV LCD POWER VIDEO Tip: This program has many more functions and possibilities. For more information, please see this program’s Help function. Start Recording A useful tool to easily compose a video mail. Wizard Settings For altering the settings of the video camera and the microphone.
  • Page 21 TRUST 632AV LCD POWER VIDEO from the camera. To do so, connect the camera and select ‘DV disk’ (see figure 7). Select the video files to be used and click on ‘Open’. The video clips will be visible in the window as icons.
  • Page 22 TRUST 632AV LCD POWER VIDEO Start NetMeeting (Start -> Programs -> Accessories -> Internet Tools -> NetMeeting) Two windows will be opened, namely NetMeeting and your Dial-up connection Fill in your user name and password and click on 'Connect' to connect to the Internet.
  • Page 23: Troubleshooting

    TRUST 632AV LCD POWER VIDEO Troubleshooting Method Read the solutions given below. Check for up-to-date FAQ’s, drivers and instruction manuals on the Internet (www.trust.com/13339) Problem Cause Possible solution Windows does The computer's USB Check the settings of your USB port does not work.
  • Page 24 TRUST 632AV LCD POWER VIDEO The drivers have not Install the drivers before connecting The camera is been installed the camera. marked with an correctly. exclamation mark The USB port does Test the USB port using a different ‘!’ in the Device not work correctly.
  • Page 25 TRUST 632AV LCD POWER VIDEO A low resolution is Select the video format (320 x 200) The webcam used. (see chapter 7.1.4). image is not The subject being Select the macro setting (see clear. filmed is very close by. chapter 4.6.5).
  • Page 26 TRUST 632AV LCD POWER VIDEO An old version of DirectX 8.0 is included on the Trust A live recording gives a displaced DirectX is installed. CD-ROM. This is installed automatically when the drivers are image and the installed. Reinstall the drivers.
  • Page 27 TRUST 632AV LCD POWER VIDEO Improve the lighting or select a The video There is insufficient different location. recordings light. contain a lot of noise (snow). Move closer. The sound is very The distance to the sound source is too low.
  • Page 28 Troubleshooter. If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers. You can find more information at the back of this instruction manual. Please have the following information available: •...

Table of Contents