1. Manuals
  2. Brands
  3. Hengx Manuals
  4. Scales
  5. HAW-3000
  6. User manual

Hengx HAW-3000 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

、
1
INTRODUCTION
、
2
ASSEMBLY
、
3
INSTALLATION
、
4
PRECAUTION
、
5
FEATURES
、
6
AVAILABLE UNITS
、
7
PANEL AND KEYPAD DEFINITION
7. 1 FUNCTION SETTING
7. 2 PARAMETER SETTING
BACKLIGHT SETTING
RESOLUTION SETTING
FILTER SETTING
ZERO BAND SETTING
BAND RATE SETTING
BUZZER SETTING
CHECK-WEIGHING MODE SETTING
CHECK-WEIGHING MEMORY SETTING
RS232 OUTPUT FORMAT SETTING
EXTERNAL DEVICE SETTING
AUTO TARE SETTING
RS232 OUTPUT CONTENT SETTING
RS232 OUTPUT CONTENT SETTING
UNITS SETTING
INITIAL UNIT SETTING
、
8
KEYPAD
ZERO
TARE
PRE-TARE
●
0~9 AND
IMPUT ELIMINATE
WEIGHING FUNCTION CONVERSION
UNITS CONVERSION
SAMPLE IN PCS AND % MODE
PRINT
RETURN
NET AND TOTAL WEIGHT CONVERSION
ACCUMULATE
ACCUMULATE DISPLAY
ACCUMULATION ELIMINATE
CHECK-WEIGHING
AUTO TARE
、
9
CALIBRATION OPERATION
9.1 CALIBRATION
9.2 SINGLE POINT CALIBRATION
、
10
INTERNAL COUNT DISPLAY
、
11
RTC
RTC TIME DISPLAY
RTC TIME SETTING
、
12
ERROR MESSAGE
12.1 ERROU MESSAGE
12.2 TROUBLE SHOOTING
、
13
SPECIFICATIONS
(normal type)
(high resolution and filter type)
、
14
RS-232 OUTPUT FORMAT
（
）
six point calibration
，
TESTING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
1
1
1
1
2
2
2
4
4
4
4
5
5
5
5
6
6
6
7
7
7
7
7
8
8
8
8
9
9
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAW-3000 and is the answer not in the manual?

Questions and answers

Related Manuals for Hengx HAW-3000

Summary of Contents for Hengx HAW-3000

  • Page 1 、 INTRODUCTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 、...

  • Page 2: Introduction

    INTRODUCTION Thank your for your purchase of a Hengx high resolution electronic scale. This scale enables you to measure the quality and weight. The scale is easy to operate, precise, stable and with fast display reaction. It is applicable in the electronic, hardware, plastic, medicine, textile and various other industries.

  • Page 3: Features

    、 ： FEATURES 1) Load Cell have OIML approved, R60 test， 2) the microprocessor in this scale features： A. automatic zero point tracking function B. tare, pre-tare and auto tare function C. ACAI function is applicable for the accuracy of unit weight D.
  • Page 4 keypad Press “accumulation” to accumulate(totally 10 times) To come into zero (HI used for check-weighing) For print Press this key to enter accumulation display function,(LO used for used to check in unit weight warning check-weighing) and accumulation memory function) Press this key to clear accumulation value Units conversion (OK used for check-weighing) To clear the input data...

  • Page 5: Function Setting

    ： 7.1 FUNCTION SETTING KEYPAD FUNCTION Parameter setting NO/OFF + display COUNT（OFFSET） NO/OFF + weighing mode NO/OFF + Linearity calibration NO/OFF + Single point calibration RTC on/off, display and setting NO/OFF + Initialization setting NO/OFF + ： 7.2 PARAMETER SETTING underline words are initial setting) OPERATION LCD display...

  • Page 6: Filter Setting

    Filter setting：-- press ： F1 / F2 / F4 / F8 (higher value, higher filter grade) press to select in turn Zero band setting：-- press ： d0 / d1 / d2 / d3 / d4 / d5 (more bigger means auto zero Tracking more bigger) press to select in turn...

  • Page 7: Check-Weighing Mode Setting

    Check-weighing mode setting:-- press ： HI(upper )/ Lo(lower)/ In(during upper value to lower value) /un ( outside the value)/ 3b( 3 point)/ oK( 1 point) /oFF(close) (totally we have 3 value to set. For example, if you set 3kg for HI, and 1kg for LO, and 2kg for OK, then if you want it warning when upper than 3kg, then you choose HI, if you want...

  • Page 8: External Device Setting

    External device setting：-- press ： PC / SH / TDP/ SCR(“PC” means connect to computer; “SH” means connect to matrix printer; “TDP” means connect to thermal printer; “SCR” means connect to large screen.) press to select in turn Auto- tare setting：-- press ：...

  • Page 9: Initial Unit Setting

    Initial unit setting：-- press ： units press to select in turn press ： back to normal weighing mode 、 ： KEYPAD ZERO：-- press ： tare：-- press tare：can’t operate below zero or above max capacity - 8 -...

  • Page 10: Pre-Tare

    Pre-tare：-- press press input pre-tare value press ： tare condition: zero symbol should display on 0~9 and ●：-- to load the pre-tare value and check-weighing Imput eliminate：-- press in the pre-tare, check-weighing mode - 9 -...

  • Page 11: Weighing Function Conversion

    Weighing function conversion：-- press used for weighing, pcs and % mode Units conversion: press for units conversion Sample in PCS and % mode：-- in PCS and % mode press put on object press to sample ： print Condition of printing：must be stable. press ：printing LCD display value.

  • Page 12: Accumulate

    ： accumulate press ，perform accumulation accumulation condition： in the stable conditon; only can accumulate once, remove objects on the pan and could accumulate once more; totally can accumulate for ten times. 1 sec later return to normal weighing mode when accumulating more than 10 times，...

  • Page 13: Accumulate Display

    ： Accumulate display press ，perform accumulating display press to select accumulation time press means: accumulate the first accumulation and quantities of individual accumulation press means：total weight accumulation, times of accumulation and quantities of accumulation press back to normal weighing mode when total value of accumulation over display range, it will show press...

  • Page 14: Accumulation Eliminate

    ： Accumulation eliminate press to carry out accumulation press to select time of accumulation press means：accumulate value of the first time and individual quantities. press to cancel the accumulation value press means： total weight, times and quantities of accumulation press to cancel the accumulation value press...

  • Page 15: Check-Weighing

    Check-weighing：-- press press to select 、 、 the check-weighing value select check-weighing condition then press to load check-weighing range press to confirm the loading of check-weighing range then press back to normal weighing mode, when check-weighing wrong, it will show press to cancel check-weighing and back to normal weighing mode Auto-tare：--...

  • Page 16: Calibration Operation

    、 ： CALIBRATION OPERATION ： （ ） 9.1 calibration six point calibration operation LCD display press to switch on the machine. press zero point calibration waiting place 1/6 of load on ，press ，to perform 1/6 load calibration waiting place 2/6 of load on，press ，to perform 2/6 load calibration waiting place 3/6 of load on，press...

  • Page 17: Single Point Calibration

    waiting place 5/6 of load on，press ，to perform 5/6 load calibration waiting place full load on，press ，to perform full load calibration waiting press to return normal weighing mode ： 9.2 single point calibration operation LCD display press to switch on the machine press press...
  • Page 18 waiting for judging the weight waiting press press back normal weighing mode 、 ： COUNT DISPLAY，testing operation LCD display press to switch on the machine press then press any other key, display total weight press ：display offset value press back to normal weighing mode - 17 -...
  • Page 19 、 ： press switch machine press press press to choose：on(with RTC)/oFF( without RTC) press ： press back normal weighing mode - 18 -...

  • Page 20: Rtc Time Display

    TC time display: operation LCD display press to switch on the machine press press press to display on turn press press back to normal weighing mode - 19 -...

  • Page 21: Rtc Time Setting

    RTC time setting: operation LCD display press to switch on the machine press press press to display in turn press from let to right to load time, press confirm press press back to normal weighing mode - 20 -...

  • Page 22: Error Message

    、 ERROR MESSAGE:--- 、 12.1 errou message: message problem Err5 Over load（max capacity +9e） ACC.ov Times of accumulation over 10 times over Display value over range Battery symbol Low battery 、 ： 12.2 trouble shooting when Error message Trouble shooting Power on Battery symbol appear Charge the battery...

  • Page 23: Rs-232 Output Format

    (high resolution and filter type) 3000 7500 mode： Max. Cap： 0g~3000g 0g~7500g 0g~15000g 0g~30000g Resolution： kg 0.0001kg 0.0002kg 0.0005kg 0.001kg Resolution： g 0.1g 0.2g 0.5g Linearity： ±2d ±2d ±2d ±2d Repeatability： 0.1g 0.2g 0.5g LCD： LCD Display LED backlight 6 1/2 Digits。 With 24.5 mm digits dimension：...
  • Page 24 RS-232 serial interface The 9PIN interface in the right back is the standard interface of RS-232, 3 PIN is output, 5 PIN is grounded，the rest is useless. BAUD RATE：9600 bps DATA BIT：8 PARITY BIT：N﹝ONNE﹞ STOP BIT：1 CODE：ASCII BIT FORMAT： START BIT DATA BIT STOP BIT DATA FORMAT：(Prt.Co)
  • Page 25 DATA FORMAT：(Prt.Co) ● ● ● ● ● ● e.g. N.W.: 1.000 H-Jing T.W.: 0.050 H-Jing G.W.: 1.050 H-Jing DATA FORMAT：(Prt.Co) ● ● ● ● ● ● e.g. N.W.: 1.000 tl.t T.W.: 0.050 tl.t G.W.: 1.050 tl.t DATA FORMAT：(Prt.Co) ● ● ●...

This manual is also suitable for:

Haw-15kHaw-30k153030751530k7515 ... Show all

Table of Contents