Daewoo DWD-AD123'S Instruction Manual page 16

* SOAK PROGRAM
1
2
3
4
NOTE
• If you want to change the setting during operation, press the Start/Pause button to hold the operation
and press the button you want.
• 'Cold', '20' °C, '40' °C, '60' °C and '95' °C washing temperatures are selectable with Soak program.
CAUTION
• If you select washing temperature '95' °C, some cold water is supplied before the drain of main wash.
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water
instead of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
DWD-AD123'S(영)_요르단 ZHRN.indd 16
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Choose the detergent/softener insert method.
• When you want to use bleach, put it into the manual detergent compartment with
detergent.
Press the Power button.
• The LED shows only '- --' and all Program Lights turn on.
Select the 'Soak' program using program selection dial.
• Washing temperature '40℃', rinse '2', spin '800'rpm, option 'Clean Jet' are selected
automatically.
• In case of Non Clean Jet option or Clean Jet off mode,rinse is added 1 time.
• If you want to change washing temperature, the spin velocity, rinse time, press
each button.
• If you press Start/Pause button after power button without selecting program, the
'Cotton' program is selected as default program.
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
16
2017. 7. 11. 오후 2:00