Philips Brilliance S221C7 User Manual page 8

2. Setting up the SMART All-In-One
Insert your SD card
1. Disconnect the power cord.
2. Insert your SDHC card to the card
slot.
Connect for VGA/HDMI input
1. Connect with VGA or HDMI cable
from your PC or AV device to SMART
All-in-One.
2. Connect power cord to SMART All-
in-One firmly and press the power
button on.
3. The SMART All-in-One turns on and
enters the previous source input
selected.
4. Press the input button
VGA or HDMI source.
Connect to either WiFi or Ethernet for
SMART All-in-One input
1. Connect RJ-45 LAN cable to your
LAN port for wired connection.
2. Connect power cord to SMART All-
in-One firmly and press the power
button on.
3. The SMART All-in-One turns on and
enters the previous source input.
selected
4. Press the input button
Android source.
5. Turn on the WiFi or Ethernet
function in the Android system
settings screen.
6. When use headphone with
external microphone, the internal
microphone will shutdown
automatically. The external and
internal microphone functionality is
available under the android mode
only.
For optimal viewing, it is recommended
to look at the full face of the SMART All-
in-One, then adjust the SMART All-in-
One's angle to your own preference.
The SMART All-in-One's tilted angle is
adjustable from 12° to 54°.
to select
• Do not touch the LCD screen when
• Careful attention is required not to
• It is recommended to stabilize with
to select
• Do not adjust the tilt angle less than
• For displays with glossy bezels the
6
Adjusting viewing angle
12°
Note
you adjust the angle. It may cause
damage or break the LCD screen.
catch your fingers or hands when
you adjust the angle.
a fixed point in order to lock the
stand if the tilted angle is equal to or
over 12°.
12°. The SMART All-in-One may fall
caused by instability.
user should consider the placement
of the display as the bezel may
cause disturbing reflections from
surrounding light and bright
surfaces.
54°