Table of Contents
Advertisement
6. Troubleshooting & FAQs
• Press "OK" to show the OSD (On
Screen Display) menu
• Press "Down Arrow" to select the
option "Color" then press "OK" to
enter color setting, there are three
settings as below.
1. Color Temperature; With settings
in the 6500K range the panel
appears "warm, with a red-
white color tone", while a 9300K
temperature yields "cool, blue-
white toning".
2. sRGB; this is a standard setting
for ensuring correct exchange of
colors between different device
(e.g. digital cameras, SMART All-
in-Ones, printers, scanners, etc)
3. User Define; the user can choose
his/her preference color setting
by adjusting red, green blue color.
Note
A measurement of the color of light
radiated by an object while it is being
heated. This measurement is expressed
in terms of absolute scale, (degrees
Kelvin). Lower Kevin temperatures such
as 2004K are red; higher temperatures
such as 9300K are blue. Neutral
temperature is white, at 6504K.
Q9:
Can I connect my SMART All-in-
One to any PC, workstation or
Mac?
Ans.: Yes. All Philips SMART All-
in-Ones are fully compatible
with standard PCs, Macs and
workstations. You may need a
cable adapter to connect the
SMART All-in-One to your Mac
system. Please contact your
Philips sales representative for
more information.
Q10: Are Philips SMART All-in-Ones
Plug-and- Play?
Ans.: Yes, the SMART All-in-Ones
are Plug-and-Play compatible
with Windows 7/8/10, Mac
OSX, Linux
Q11:
What is Image Sticking, or
Image Burn-in, or After Image,
or Ghost Image in LCD panels?
Ans.: Uninterrupted display of still or
static images over an extended
period may cause "burn in",
also known as "after-imaging"
or "ghost imaging", on your
screen. "Burn-in", "after-
imaging", or "ghost imaging"
is a well-known phenomenon
in LCD panel technology. In
most cases, the "burned in"
or "atter-imaging" or "ghost
imaging" will disappear
gradually over a period of
time after the power has been
switched off.
Always activate a moving
screen saver program when you
leave your SMART All-in-One
unattended.
Always activate a periodic
screen refresh application if
your SMART All-in-One will
display unchanging static
content.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe "burn-in" or
"after-image" or "ghost image"
symptoms that will not disappear
and cannot be repaired. The damage
mentioned above is not covered
under your warranty.
33
Advertisement
Table of Contents
