Chapter 2. Basic Setup - Xpresense The Wag Owner's Manual

Chapter 2. Basic Setup
Read this chapter to learn how to do the following:
Turn the WAG Base Unit on and off.
Charging the Ring
Waking the Ring
Pausing/Un-pausing the Ring
Making Connections
Optimizing Wireless Reception
Multiple Wag Systems on the Same Stage
Power On/Power Off
To turn on the Base Unit, just connect the power supply (Wall Wart) to the rear of the unit, and
then plug the power supply into 110 volt AC outlet. When power is applied, the LCD should
light up and display PATCH 01.
To turn off the Base Unit, simply remove the connection or the power adapter from the wall.
Charging the Ring
The WAG Ring is powered by a rechargeable battery (lithium ion). To ensure proper
operation of the Ring, you should recharge it after long periods of continuous use. The
ring enters a low power sleep mode when off of your finger but still may need to be
charged after sitting idle for a long period.
User's Manual
page 11