Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver
wrench
, and a rubber mallet
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M4 x 16mm
Screw (66)–2
Frame Spacer (83)–1
M8 x 19mm Button
Screw (22)–2
M8 x 45mm Button Bolt (50)–4
M8 Nylon
Locknut (46)–4
M10 Split
Washer (70)–4
M10 x 27mm
Screw (71)–3
M10 x 112mm Carriage Bolt (34)–4
5
.
M10 Nylon
Locknut (29)–6
M10.3 Black
Washer (53)–2
Adjustment Bolt (20)–2
M10 x 78mm Button Bolt (27)–2
M10 x 88mm Button Bolt (63)–1
, an adjustable
M10
Washer (38)–6
Advertisement
Table of Contents
