Conversion Table - JVL FBG10 User Manual

5.1
FBG10 contains a convertion table which is shown below.
In this conversion indicates:
INDEX:
The value which master writes as output data in COMMAND. See section 3.6, "Descrip-
tion of Output Data", page 21.
COMMAND NAME:
The ASCII-string, which the command is converted to on RS 232.
QUESTION ALLOWED, COMMAND ALLOWED:
Question allowed indicates if it is legal to request on the content of the motor controller
register. Command allowed indicates if it is legal to allocate a value to the motor control-
ler register. See section 4.2, "Command Description", page 29.
FORMAT:
Indicates default format for the motor controller register.
LONGINT = Signed integer, 32 bit.
WORD = Unsigned integer, 16 bit.
INTEGER = Signed integer, 16 bit.
FIXED = Fixed point * 1000. Se section 4.3.9.
NONE = No data in connection with this command.
Note: By rewriting of the table, (is made by JVL according to customer specifications),
FBG10 can be adapted to other products with another set of commands.
Tabel.
Question
allowed
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
36 JVL Industri Elektronik A/S — User Manual — Field Bus Gateway FBG-10

Conversion Table

Command Format
allowed (default)
YES LONGINT
YES WORD
YES INTEGER
YES LONGINT
YES LONGINT
YES LONGINT
YES WORD
YES WORD
YES LONGINT
YES LONGINT
YES WORD
YES LONGINT
Command
Index
name
R00..R99 0..99
RB00..RB99 100..199
RI00..RI99 200..299
XA00..XA63 300..363
XP00..XP63 364..427
XR00..XR63 428..491
XV00..XV63 492..555
CB00..CB63 556..619
RX00..RX31 620..650
AC 651
ACH 652
ACP 653