Attaching The Antenna - Motorola MTH800 Basic User's Manual

Attaching the Antenna

Turn the MTH800 Off before installing or removing the antenna.
Insert the bottom of the antenna into the screw-in base on the top of
the MTH800. Turn clockwise until snug. Do not force.
Powering On/Off (On
To power On, press and hold
check and registration routine. After successful registration, the
MTH800 is in service.
To power Off, press and hold
Powering Off message is displayed.
Powering On (Emergency Button)
Press and hold the Emergency button to power On. The MTH800
will power On in Emergency Mode or in standard mode
(as programmed).
Powering On with Transmit Inhibit (TXI) Active
Transmit Inhibit is a feature allowing you to switch off transmission
before entering a Radio Frequency (RF) sensitive area. To activate
this feature, press
Activate.
Off/End/Home Key)
-
. Your MTH800 performs a self-
. You will hear a beep and the
and select More... > Networks > TXI Mode >
Pressing the Emergency button, even if
Transmit Inhibit is activated, causes the
MTH800 to transmit immediately. The MTH800
must NOT be within the RF sensitive area when
entering Emergency Mode.
29