Page 2
SPECIFICATION Art. 216669 OUTPUT VOLTAGE 18 V DC WEIGHT 2,9 KGS (without battery) DIMENSION 420 x 76 x 122mm (LxWxH) ACCESSORY battery & charger & case & manual copper & aluminium APPLICATION terminal & conduct crimping AWG/MCM CRIMPING RANGE copper 10-240mm²...
Page 3
216669. (You could find the range at this manual on page 1). Do not crimp without any material in crimping area, otherwise the tool will be damaged.
Page 4
• There is a protecting system that while the battery is full charged, it will stop charging automatically. And if the battery temperature is over 65 degree, it will stop charging automatically, too. insert smoothly Digital monitor Charging only for HAUPA batteries!
Page 6
MANUAL/INSTRUCTION OF BATTERY: Voltage 9,6 V 14,4V CURRENT CHARGING Ni-MH B-03 B-02 4 Ah 120 min. LI-ION 4 Ah 120 min. 2 Ah 60 min. BEFORE OPERATION PLEASE NOTE: • Do not put the battery together with any metal. Otherwise the battery may have a short circuit. •...
Page 7
HOW TO USE 216669: CRIMPING STEPS • Insert the battery to 216669 as below picture 1: While the battery is inserted the battery lock will lock the battery. Picture 1: Set/Take batttery • After setting suitable crimping material, then you could use the start switch and the oil return switch to operate the tool.
Page 8
•♦ The crimper can not operate to the original position and while operating, the speed is very slow: Please contact your distributor..convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.