Advertisement
HOW TO USE CHARGER Art. 215513:
• The charger Art. 215513 is suitable for Li-Ion battery (Li-Ion) 215511 (4Ah) and 215503
(2Ah). The voltage of charger: 18V.
• While connecting to power, the digital monitor shows
• Already connected to power, but the battery is not in the charger, the digital monitor shows
and twinkles once a second.
• After inserting the battery in, the charger will detect the battery voltage and show the
capacity in percentage.
• If the battery is well charged, the digital monitor shows
seconds.
• The voltage of battery is low, the digital monitor shows
second, it means the battery error/defect.
• The temperature of battery is over, the digital monitor shows
once a second, you have to wait until the battery is cool down, then you could charge the
battery.
• After charning 10 minutes, the voltage is not rising, the digital monitor shows
buzzer buzzes once two seconds and stops one second, it means the battery error/defect.
• The max. charging time is about 60-70 minutes. After 70 minutes, no matter the battery is
full charged or not, the charger will be stopped.
• While charging, the digital monitor shows the capacity in percentage each 5% until 90%.
After 90% of capacity, it will show the capacity in percentage each 1% until full charged,
i.e. 100%.
• There is a protecting system that while the battery is full charged, it will stop charging
automatically. And if the battery temperature is over 65 degree, it will stop charging
automatically, too.
Digital
monitor
Charging only for HAUPA batteries!
. The buzzer buzzes once.
. The buzzer buzzes every 5
. The buzzer buzzes once a
. The buzzer buzzes
insert
smoothly
. The
Advertisement
