Backup From Memory Card To Disc - Plextor PX-650US User Manual

•
The displayed message varies depending on the connected device, current operation, and disc type.
•
For tablet PC, mobile device, and digital camera, a "USB Mode" menu may appear when it is connected
to the drive. Select "Disk Drive" to access data from your device. For details, refer to the respective
device user's manual.
•
Please unlock your mobile device before connecting to PlexEasy through USB.
•
You can also customize the burning settings before you start burning the disc. Refer to
page 20.

Backup from Memory Card to Disc

You can copy any data stored on the memory card onto a disc.
1. Connect the AC/DC adapter and turn on the drive.
2. Press the Eject button to eject the tray and then place the disc on the tray.
3. Close the disc tray.
4. Insert a memory card into the memory card slot.
5. The drive automatically detects the memory card and a message similar to "
Press to Start" should appear on the LCD display.
6. Press to start copying data.
7. When the writing process is complete, the drive automatically ejects and a "
message appears on the LCD display.
Note:
•
If there is no disc inserted into the drive, an "
display.
•
The displayed message varies depending on the connected device, current operation, and disc type.
•
You can also customize the burning settings before you start burning the disc. Refer to
page 20.
Backup from Disc to USB
You can copy the disc data to a USB storage device.
1. Connect the AC/DC adapter and turn on the drive.
Eject button to eject the tray and then place the disc on the tray.
2. Press the
3. Close the disc tray.
4. Plug in a USB drive to the USB port of the drive. A message similar to "
to Start" should appear on the LCD display.
5. Press >
6. Press repeatedly to select "2. Disc -> USB" and press
7. A " Disc -> USB. Press
copying data.
8. When the copying process is complete, the drive automatically ejects and a "
message appears on the LCD display.
O
PERATION
18
SD -> Disc. Insert Disc" message appears on the LCD
to enter the Function (1. Function) menu.
to Start" message appears on the LCD display. Press
"Burn Setup" on
SD -> DVD+R.
Completed"
"Burn Setup" on
USB -> DVD+R. Press
to confirm the selection.
to start
Completed"