Applicable Standard And Reference Documentation - Seagate ST12450W Product Manual

ST12450W/WD Product Manual, Rev. A
2.0
2.1
2.2
Applicable standard and
reference documentation
Seagate takes all reasonable steps to insure that its products are certifiable
to currently accepted standards. Typical applications of these disc drives
include customer packaging and subsystem design.
Safety agencies conditionally certify component parts, such as the Barra-
cuda disc drive, based on their final acceptability in the end-use product. The
subsystem designer is responsible for meeting these conditions of accept-
ability in obtaining safety/regulatory agency compliance in their end-use
product and certifying where required by law.
Standards
The Barracuda disc drive is a UL recognized component per UL1950, CSA
certified to CSA C22.2 No. 950-M89, and VDE certified to VDE 0805 and
EN60950.
The Barracuda disc drive is supplied as a component part. It is the respon-
sibility of the subsystem designer to meet EMC/regulatory requirements.
Engineering test characterizations of radiated emissions are available from
the Seagate safety department.
Applicable reference documents
Barracuda 2, 2HP Installation Guide
Seagate part number: 83328890
SCSI-2 Interface Product Manual (volume 2)
Seagate part number: 77738479
ANSI small computer system interface (SCSI) documents
ANSI X3.131-1986
X3T9.2/86-109 Rev. 10H (SCSI-2)
X3T9.2/91-010 Rev. 10
In case of conflict between this document and any referenced document, this
document takes precedence.
(SCSI-1)
(SCSI-3) Parallel Interface
3