Table of Contents
Advertisement
Installation of the Projector
RGB connection
Connect PC or other devices with RGB output to the COMPUTER IN1 input.
12V OUTPUT
(OPTION)
Connect RGB (R/B/G/H/V) or component (YPbPr) source to COMPUTER IN2 inputs.
12V OUTPUT
(OPTION)
HDBaseT / LAN connection
HDBaseT is a technology to transmit image signal using a LAN cable.
LAN Connection - When this connector to be the LAN (RJ-45) function only, connect it to computer
or Hub. Enter the correct IP Address or the computer host name which is the same as the projector's
host name. Then you can control the projector by remote through the Internet.
Video Signal - When this connector to be the video signal input, connect it to a device with HDBaseT
Use a LAN cable of up to 100m long. If the cable is longer than that, the image may be deteriorated
and a failure of LAN transmission may occur.
CONTROL
12V OUTPUT
(OPTION)
LAN
REMOTE
CONTROL
HDBaseT
LAN - PC or Hub
Video - Device with HDBaseT output (such as high-definition TV source, Blu-ray Player....etc).
28
28
English-
English-
Desktop or laptop
computer
Desktop or laptop
computer
V
H
B/Cb/Pb
G/Y
COMPUTER IN 2
HDMI 1
DVI-D
R/Cr/Pr
COMPUTER IN 1
IN
OUT
SDI
HDMI 2
Advertisement
Table of Contents
