Mercedes-Benz R 350 BlueTEC 2012 Operator's Manual page 61

seat belt lies properly across their bodies
without the need for a booster seat.
Install the child restraint system according to
the manufacturer's instructions.
The child restraint system must be installed
firmly on both brackets.
An incorrectly installed child restraint system
can come loose in the event of an accident,
causing the child to be severely or fatally
injured.
Child restraint systems/child restraint
retaining brackets that are damaged or have
suffered damage due to an impact must be
replaced.
LATCH-type (ISOFIX) is a standardized
securing system for specially designed child
restraint systems on the rear seats.
Securing rings for two LATCH-type (ISOFIX)
child restraint systems are installed on the
left and right:
on the seat cushions of the outer seats in
R
the second row
on the backrests of the seats in the third
R
row of seats
Secure non LATCH-type (ISOFIX) child
restraint systems using the vehicle's seat belt
system. Always install child restraint systems
according to the manufacturer's instructions.
X
Move the rear seat backrests in the second
row to an upright position (
The securing rings on the outer seats in the
second row of seats are covered by an
upholstered lining.
:
;
X
Slide the upholstered lining to the side.
X
Install the LATCH-type (ISOFIX) child
restraint system. Comply with the
manufacturer's instructions when doing
so.
The securing rings on the seats in the third
row are covered by protective caps.
Y page 101).
X
Remove protective caps = in the third row
of seats.
I n f o r ma t i o n P r o v i d e d b y :
Children in the vehicle
Securing rings for outer seats in the
second row
Installation instructions for the securing
ring
59
Z