Table of Contents
Advertisement
Installing the System
Caution: Take care if using a sharp tool to open packages that you do not damage any item.
Also, beware of the following when moving the system rack.
•
Only move the system rack while it is in its packaging.
•
Beware that the rack may tilt if you use an A-frame carrier for transport.
•
Do not tilt or place the system on its side. Always keep it vertical.
Connecting the Power and Battery Cables
Follow the instructions below to connect the power and battery cables to the SMG-3000 system.
1. Loosen the screw securing the rear cover and remove the cover.
2. Loosen the screw securing the left-hand side cover (looking from the front of the system) and remove
the cover.
3–3
Advertisement
Table of Contents
