Advertisement
Setting up continue...
The REMOTE ACCESS requires a three-digit code
REMOTE
that you need to enter if you call when away from
ACCESS
home to check your messages. The default is 321.
You can change it to any three digits you want.
1
Press the OK/MENU button.
2
Press the UP or DOWN button until the display
shows REMOTE ACCESS
3
Press the OK/MENU button to confirm.
first digit blinking.
4
Press the UP or DOWN button to set the first digit
of the REMOTE ACCESS code.
5
Press the OK/MENU button to confirm.
6
Press the UP or DOWN button to set the second
digit of the REMOTE ACCESS code.
7
Press the OK/MENU button to confirm.
8
Press the UP or DOWN button to set the third
digit of the REMOTE ACCESS code.
9
Press the OK/MENU button to confirm the new
REMOTE ACCESS code setting.
10
Press the
Two different compression rates (ON and OFF) are
TAM HD:
provided for you to select the recording quality/
ON/OFF setting
total recording time of incoming messages.
With the compression rate set to ON the recording.
quality will be higher, but it will only save up to
about 20 minutes of messages.
With the compression rate set to OFF the recording
quality will be lower, but it will save up to about 40
minutes of messages.
Binatone Help Line - 0845 345 9677
The display shows OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
REMOTE ACCESS.
REMOTE ACCESS
REMOTE ACCESS
REMOTE ACCESS
The current three-digit code is shown, with the
The second digit of the code will be blinking.
The third digit of the code will be blinking.
/
button to return to standby mode.
Calls are charged at Local Call rate.
12
.
Hide quick links:
Advertisement
