Advertisement
Answering Machine System continue...
Press " 9 " to turn the answering machine ON.
to switch between OGM1 and OGM2,
Press " 0 " twice quickly to delete all old messages.
(There could be a delay while the delete is
being done, before you hear a beep and the
menu list again.)
Press " # " to disconnect the call.
If the answering machine is switched off, it will
Switching ON
from a remote
answer your call after 15 rings allowing you to
location
switch the machine ON from a remote location.
Using a tone dialling phone, dial your home phone
1
number.
2
When you hear the outgoing message, key in a "*",
followed by your REMOTE ACCESS code.
Press keypad "9" to switch ON.
3
Interrupt and bypass the
outgoing message (OGM)
Start message playback,
then pause and restart
during message playback
Skip forward to next
message
Repeat the current
message
Skip back to the
previous message
Stop playback or recording
Binatone Help Line - 0845 345 9677
When the answering machine is ON, press "9"
Delete the message currently
being played back
Voice prompt: "Message erased"
Delete all messages that
have been played back
Voice prompt: "All Messages erased"
Play the outgoing message
(OGM1 or OGM2)
Record a new outgoing
message (OGM1 or OGM2)
Switch the machine on
Switch between OGM1 and OGM2
Voice prompt "Answering
machine on. Announcement
1 (or 2)"
Switch the machine off
Voice prompt: "Answering
machine off"
Calls are charged at Local Call rate.
30
Hide quick links:
Advertisement
