Advertisement
11. Remote operation
Your Acura 3000 lets you check your messages, or otherwise operate your
answering machine, by calling the answering machine when you are away from
home. To protect your privacy, access is only possible if you enter the three-digit
REMOTE ACCESS Code. The base will display REMOTE while the Acura 3000
is being accessed remotely.
In standby mode, press the OK/MENU button.
1
To check
your
2
Press the UP or DOWN button until the display
shows REMOTE ACCESS.
REMOTE
Press the OK/MENU button to display your code
3
ACCESS code
setting.
4
Press the
(Note: See page 12for how to change your code.)
To check
1
Using a tone dialling phone, dial your home phone
your
number.
messages
2
Press " * " during the OGM to stop it playing, or wait
from a
until the OGM finishes.
remote
Enter your REMOTE ACCESS Code.
3
location
If the code is accepted, a list of options will be heard.
If the code is not recognised you will hear no
feedback, and you will need to enter it again. Please
note that if the code is entered incorrectly three
times consecutively, the call will be terminated
automatically.
4
Press "2" to playback your messages.
Intruction code menu shown on the next page.
Notes:
During remote operation and when messages are not being played, you must
press a key within 10 seconds, otherwise the machine will cut off your call.
During remote operation, the playback is paused automatically after about 3
minutes, and to continue the "2" key must be pressed within 10 seconds, or the
machine will cut off your call.
Binatone Help Line - 0845 345 9677
The default code is '321.'
/
button to return to standby mode.
For other instructions, see the Remote
Calls are charged at Local Call rate.
28
Hide quick links:
Advertisement
