Connecting The Cisco Asr 903 Router To The Network - Cisco ASR 903 Installation Instructions Manual

Connecting the Cisco ASR 903 Router to the Network

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
SUMMARY STEPS
1. Disconnect the power cord from the power source. Do not touch the metal prongs on the power cord when
it is still connected to the power supply.
2. Remove the power cord from the power connection on the power supply. Do not touch the metal prongs
embedded in the power supply.
3. Loosen the captive installation screws.
4. Grasp the AC power supply with one hand, and slide it part of the way out of the chassis. Place your other
hand underneath the power supply, and slide it completely out of the chassis.
5. If the power supply bay is to remain empty, install a blank filler plate (Cisco part number
A900-PWR-BLANK) over the opening, and secure it with the captive installation screws.
DETAILED STEPS
Step 1
Disconnect the power cord from the power source. Do not touch the metal prongs on the power cord when it is still
connected to the power supply.
Step 2 Remove the power cord from the power connection on the power supply. Do not touch the metal prongs embedded in
the power supply.
Step 3 Loosen the captive installation screws.
Step 4 Grasp the AC power supply with one hand, and slide it part of the way out of the chassis. Place your other hand underneath
the power supply, and slide it completely out of the chassis.
Step 5 If the power supply bay is to remain empty, install a blank filler plate (Cisco part number A900-PWR-BLANK) over
the opening, and secure it with the captive installation screws.
Connecting the Cisco ASR 903 Router to the Network
The following sections describe how to connect cables on the Cisco ASR 903 Router as a satellite shelf:
Connecting Console Cables
These sections describe how to connect to the Cisco ASR 903 Router as a satellite shelf using console cables:
• Connecting to the Serial Port Using Microsoft Windows
• Connecting to the Console Port Using Mac OS X
Cisco ASR 9000 Series Aggregation Services Router Satellite Systems Installation Guide
52
Installing the Cisco ASR 903 Router as a Satellite Shelf