Connect Your Smart Device To Illuminate - Philips Illuminate Instruction Manual

Customizable lighting system led 25 faceted c9 string light

Hide thumbs Also See for Illuminate:

Instruction manual (20 pages)

Table Of Contents

Table of Contents

2. Plug the round connector on the Control Box (Part A) into the round connector on the

add-on lights (Part B). Line up the pins and the rectangular pins inside the connectors

before making the connection. Tighten the ring clockwise until hand tight (do not over

tighten).

3. To add several sets, or the extender cord, remove cap from the end of the set you want

to connect to by unscrewing the cap counter clockwise and follow the instructions

above.

◊ NOTE: Use only Illuminate™ light strings and extender cords with this control box or

you may damage the control box or light strings.

When adding additional sets, please make sure you update the number of sets

connected in the extended settings screen, please see page 15, the "Using add on sets"

section, items 2-5

4. You can connect and mix and match different Illuminate™ light strings with different

bulb shapes on them all connected to the same control box as long as you do not

exceed 300 bulbs (12 sets of 25 lights max). For example, you can have 2 sets of C9

bulbs and 3 set of icicles (125 bulbs) connected to one control box in any order of bulb

shape along with several extender cords between sections of bulbs. NOTE: A

maximum of 4 extender cords is recommended when connecting over 200 lights to a

single control box.