Speaker Connections - Profile Clarus CL440 Installation And Owner's Manual

Mosfet power amplifiers
Table of Contents

Advertisement

S
PEAKER CONNECTIONS (BRIDGED)
The Clarus amplifiers are capable of being bridged in a mono configuration. This feature allows
you the flexibility of using the amplifier to drive a ** subwoofer or a center channel. In this
configuration the amplifier sums the right and left channel to deliver one channel (mono)
output.
Please note: in order for the amplifier to sum right and left signal information, both right and
left RCA connections must be made.
**CAUTION! In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any
lower than 4 Ohms will cause the amplifier to overheat and possibly cause permanent
damage to the amplifier!
TWO CHANNEL BRIDGED SPEAKER CONNECTIONS
FOUR CHANNEL BRIDGED SPEAKER CONNECTIONS
4 Ohm Speaker
4 Ohm Speaker
4 Ohm Speaker
4 Ohm Speaker
11
4 Ohm Speaker
4 Ohm Speaker

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents