Connecting A Printer Cable; Using A Parallel Cable - Samsung CLP-500 Setup Manual

Connecting a Printer Cable

Step 5.
You need to connect your printer to the computer with either a
parallel interface cable or a Universal Serial Bus (USB) cable.
If you are a Macintosh user, you can use only a USB cable.

Using a Parallel Cable

N
OTES
• The parallel port may not be available depending on your
country.
• To connect the printer to the parallel port of the computer
requires a certified parallel cable. You need to buy a IEEE1284
compliant cable that is within 3m in length.
1
Make sure that both the printer and the computer are
turned off.
2
Plug the parallel printer cable into the connector on the
back of the printer.
Push the metal clips down to fit inside the notches on the
cable plug.
3
Connect the other end of the cable to the parallel interface
port on your computer, and tighten the screws.
See the User's Guide of your computer, if you need help.
:
To the parallel port on
your computer
S G 21
ETUP UIDE