Samsung CLP-500 Setup Manual page 73

2.18
U P
SING RINT
2
Load transparencies only in the Multi-purpose Tray with
the print side down, and the top with the adhesive
strip entering the printer first. Adjust the guide to fit the
width of the transparencies.
3
When you print, configure the paper source to MP Tray, the
paper type to Transparency, and the paper size in the
software application. For details, see page 3.7.
N
:
OTES
• To prevent transparencies from sticking together, do not let the
printed sheets stack up as they are printed out.
• Place transparencies on a flat surface after removing them from
the printer.
M
ATERIALS