Clarion NX602 Owner's Manual & Installation Manual page 44

Front Right
Front Left
Rear Right
Rear Left
4-Speaker system
2-Speaker system
Front Right
Front Left
Not used.
Insulate each wire
• Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
Gray
Gray/Black
White
White/Black
Purple
Purple/Black
Green
Green/Black
or
Black wire (Ground lead)
Gray
Gray/Black
Orange/White wire (Illumination lead)
White
White/Black
Purple
Blue wire (Auto antenna lead)
Purple/Black
Green
Green/Black
Fresh Green wire (Parking)
Purple/White wire (Reverse)
18-Pin Connector Extension Lead
(attached to the source unit)
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
Yellow wire (Memory back-up lead)
Connect directly to battery
Red wire (Power lead)
Accessory
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Connect to vehicle chassis ground
Connect it to the car power supply terminal
for illumination
Connect it to the car power supply terminal
for antenna
Connect it to the car power supply terminal
for parking
Connect it to the car power supply terminal
for reverse
12V
NX602
43