Sound - Clarion NX602 Owner's Manual & Installation Manual

24-Hour format
Touch [On] to select 24-Hour format.
Touch [Off] to select 12-Hour format.

Sound

Beat EQ
Touch the button to the right of "Beat EQ" to
show EQ setting menu. You can select : "Bass
Boost", "Impact", "Excite", "Custom" or "Off".
To adjust the value, touch [-] or [+] button on
the screen.
Touch [Back] to exit.
Balance/Fader
Touch [Set ] to the right of "Balance/Fader" to
show Balance/Fader setting menu.
Touch [ ] or [ ] button to adjust Fader,
and touch [ ] or [
Balance.
Touch [Center] to reset the value.
Touch [Back] to exit.
Sub woofer control
Touch [-] or [+] button on the right of "Sub
woofer control" to adjust sub woofer level.
Sub woofer phase
Touch to select sub woofer phase Normal or
Reverse.
High pass filter
Touch the button to the right of "High pass
Filter" to show the sub-menu, then select the
filter: "Through", "55Hz", "85Hz" or "120Hz".
Touch [Cancel] to exit.
Low pass filter
Touch the button to the right of "Low pass
Filter" to show the sub-menu, then select the
filter: "Through", "62Hz", "95Hz" or "135Hz".
Touch [Cancel] to exit.
AMP Cancel
Touch [On] to turn off the amplifier.
Touch [Off] to turn on the amplifier.
Magna Bass Ex
Touch [On] to turn on the loudness.
] button to adjust
Display
Dimmer Mode
Touch [Auto], [Day] or [Night] to choose
dimmer mode.
Auto: The dimmer is controlled by your car
light.
Dimmer
Touch [-] or [+] button to the right of "Dimmer"
to adjust dimmer.
The setting is only for Day or Night.
Setup
Touch [Setup] on the right of screen to
spread the setting list. then touch the button
to the right of desired option to adjust or show
the sub-menu. Touch [Close] to close the list.
AUX
• Input Aux Level
Choose "Low", "Middle" or "High" input
level of auxiliary device.
Bluetooth
• Bluetooth
Choose Bluetooth function on or off.
• Telephone Speaker
Choose Front Left or Front Right speaker
at telephone mode.
• Tone Select
Touch [Auto] to use ringtones of your
mobile phone.
Touch [Internal] to use preset ringtone of
the unit.
• Software Update
Update the software.
Camera
• Camera Interrupt
Choose [On], the screen will switch to rear
camer menu automatically when backing.
DivX
• Registration Code
Display DivX Registration Code.
13
NX602