Playing Back Sound On Audio-Visual Devices - Sony STR-DH190 Operating Instructions Manual

Playback
Playing Back Sound on
Audio-Visual Devices
1
Press the input button which
corresponds to the device
you want to play.
The selected input appears on the
display panel.
2
Start playback on the
connected device.
3

Press +/– to adjust the
volume.
Note
Before you turn off the receiver, be sure to turn
down the volume level to avoid damaging your
speakers the next time you turn on the receiver.
Tip
• To turn the volume up or down quickly
– Turn the VOLUME knob quickly.
– Press and hold one of the
• To make fine adjustments
– Turn the VOLUME knob slowly.

– Press one of the +/– buttons and release
it immediately.
Input
buttons
 +/–

+/– buttons.
Playing Back Sound on a
BLUETOOTH Device
You can receive audio content from a
WALKMAN®, smartphone or tablet that has
a BLUETOOTH function and listen to it via
this receiver.
About the BLUETOOTH indicator
The BLUETOOTH indicator above the
BLUETOOTH button on the receiver lights
up or flashes in blue to show the
BLUETOOTH status.
Receiver status
The receiver is
searching for a
BLUETOOTH device to
connect
BLUETOOTH pairing
BLUETOOTH
connection is
established
BLUETOOTH
BLUETOOTH
PAIRING
 +/–
/,
/,
, 
Indicator status
Flashes slowly
Flashes quickly
Lights up
21 GB