Table of Contents
Advertisement
1.3
Legend
3
1 - User interface LED: see table
2 - MicroSD memory card slot (optional)
3 - Connection to the SCS BUS
4 - Ethernet connection
5 - Reset key:
– press and hold for 10 seconds to restart the Energy Data Logger;
– press and hold for 20 seconds to restart the Energy Data Logger , and set the dynamic
selection of the IP address.
User interface LEDs table
Red LED
flashing slowly and regularly:
Green LED
flashing slowly and regularly:
Green LED
flashing quickly and regularly:
Green LED
flashing slowly and irregularly:
Red-green LED
flashing quickly:
1
5
2
3
no network found;
waiting for an address to be assigned.
device waiting to be configured.
time on the device not configured.
device working and configured.
IP or microSD configuration error.
Reset, check the configuration, and the microSD
memory card model.
5
Energy Data Logger
Installation manual
4
1
5
2
Advertisement
Table of Contents
