Table of Contents
Advertisement
3.2
Procedure for Tablet and Smartphone
If viewing the pages using a Tablet or a Smartphone, it is recommend to set fixed IP and IP mask;
in alternative, use an application for the identification of UPnP devices.
3.3
Troubleshooting
Problem
When directly connected to the
PC, the device cannot be displayed
among the system resources.
The device web pages are not
correctly displayed
Note: the device has been tested with the following browser versions:
Internet Explorer
Google Chrome
Safari
Mozilla Firefox
Opera
Solution
Power the device by pressing and holding down the reset
key until the red LED starts flashing: initialisation of the
device will start, and the following parameters will be set:
IP address: 192.168.1.5
IP Mask: 255.255.255.0
It will now be possible to connect to the device and
reconfigure the parameters.
1. In the browser parameters enable "Compatibility
mode";
2. Delete the browser history, including, including
"Temporary files/cache".
7 (on Windows XP) and 9 (on windows 7)
19.0.1084.56
5.1.7
12
11.64
13
Energy Data Logger
Installation manual
Advertisement
Table of Contents
