Table of Contents
Advertisement
This section allows you to configure wireless settings on your
router.
Basic
The below Wireless – Basic screen lets you enable or disable
wireless. The default setting for wireless is enabled. You can
also hide the access point so others cannot see your ID on the
network.
Security
The next screen is the Wireless – Security y screen which allows
you to select the network authentication method and to enable or
disable WEP encryption. Note that depending on the network
authentication that is selected, the screen will change accordingly
so additional fields can be configured for the specific
authentication method.
Network authentication methods include the following —
• Open n —anyone can access the network. The default is a
disabled WEP encryption setting.
• Shared d —WEP encryption is enabled and encryption key
strength of 64-bit or 128-bit needs to be selected. Click on
Set Encryption Keys to manually set the network encryption
keys. Up to 4 different keys can be set and you can come
back to select which one to use at anytime.
4-Port Wireless Ethernet Router
User Manual
Version 1.0
Wireless
42
Advertisement
Table of Contents
