Quick Setup
This section will explain how to configure the router.
ATM PVC Configuration
To enable the auto-connect process, click on the box labeled DSL
Auto-connect, a process that will automatically detect the first
usable PVC and automatically detect PPPoE, PPPoA, and Bridge
Protocol (with DHCP Server available). To continue, click on the
Next t button.
If you do not use DSL Auto-connect, then you may need to
change the VPI and VCI numbers. Quality of service can also be
enabled on this screen.
Furthermore, if you do not use DSL Auto-connect, then you will
need to select the connection type and encapsulation mode from
a list as shown below.
4-Port Wireless Ethernet Router
19
User Manual
Version 1.0