Client Setup - Promax Platform Studio series Quick Start Manual

Client Setup

PLEASE NOTE:
- Client workstations must be physically connected to the Platform (either direct or thru an
approved switch) before installing the Platform Client Software.
- Client workstation NICs must be set to "DHCP". If you are unsure how to set your network
connection for DHCP please contact your system administrator.
Access to the Platform occurs through a browser interface. The Platform supports both Google Chrome
and Apple Safari browsers. Once logged into the server, the browser allows for easy mounting and
dismounting of Platform Spaces. To begin using the Platform, follow the steps below for both PC and
Mac users.
The Platform requires a 'Listener' program to be installed on the workstation.
To start, bring up a Google Chrome or Safari browser and type in
platform1.local with the name of your server if it is different).
You will see the following message appear in the browser:
Click on the download link appropriate and the browser will download the Platform Listener
program to the download folder on your computer.
© 2014 ProMAX Systems | All Rights Reserved
ProMAX Platform Studio Quick Start Guide
http://platform1.local (substitute
Page 13 of 24