Printronix ANSI Printer Programmer's Reference Manual page 21

Message
LOADING PROGRAM INTO
FLASH
PLEASE WAIT...RESET IN
PROGRESS
RESTORING BOOT CODE
SECURITY CODE
VIOLATION
SENDING PROGRAM TO
EC PROCESSOR
TABLE MISMATCH
DOWNLOAD AGAIN
Explanation
The printer has deleted the
previous program from flash
memory and is loading the
new program into flash
memory.
The printer finished loading
the program into flash
memory and is automatically
resetting itself.
Normal download initialization
message.
The software running or being
downloaded does not match
the security PAL code.
The printer is loading the
engine controller program into
the engine controller.
EC software update in
process.
Flash Memory Message Guide
Required Action
None
None
None
Install the correct PAL or
program. (PAL and program
must match.)
None
Download the program again.
21